Showing posts with label 2008. Show all posts
Showing posts with label 2008. Show all posts

Thursday, January 03, 2008

Skill Builder

I am not certain when this particular Skill Builder became available, but there is one available titled:

Managing an AutoCAD Civil 3D 2008 Project with Autodesk Vault

This Skill Builder is a 20 page .pdf file that demostrates how to set up a AutoCAD Civil 3D project using Autodesk Vault, how to modify project structure with Vault, and contains some best practices.

For those that are just starting down this road this can be very useful. For others this can be a good refresher.

Be Better!

Monday, October 22, 2007

Survey Link for AutoCAD Civil 3D 2008

There is an extension now available for AutoCAD® Civil 3D® 2008 customers on Autodesk Subscription. The extension is...

AutoCAD Civil 3D 2008 Survey Link

It allows raw survey data to be converted into an Autodesk field book file (.fbk) and then imported directly into Civil 3D 2008. No longer will we need to use Land Desktop in this process.

This downloadable extension requires that Civil 3D 2008 Service Pack 2 be already installed.

Login to subscription center to download.

Yes, it is the same as is available in Land Desktop, now directly available in Civil 3D 2008.

Service Pack 2 Update

If you receive a "1603 error" when installing Service Pack 2 for AutoCAD Civil 3D 2008, download and install the Service Pack again. Some users were getting the error which involved custom profiles. A newer Service Pack was posted and will correct those particular problems.

If you installed the original Service Pack (the newer Service Pack was posted Friday about 4 pm EDT) without any error (my original SP installed fine), there is no need to reinstall the newer Service Pack.

Thursday, October 18, 2007

AutoCAD Civil 3D 2008 Service Pack 2 Available

Service Pack 2 was posted for download. This Service Pack includes the following:

Service Pack 1 for AutoCAD 2008
Service Pace 1 for AutoCAD Map 3D 2008
Over 70 updates for AutoCAD Civil 3d 2008

Also available is Service Pack 2 for Land Desktop Companion 2008.

Friday, August 31, 2007

Data Management Server 2008 Service Pack 1

OK, Let's try again from the top.

Service Pack 1 for Vault 2008 and Productstream 2008 has been reposted.

Service Pack 1 for Vault 2008 and Autodesk Productstream 2008 fixes a variety of issues pertaining to both of these products. As always, carefully read the Readme file (it is not very big), it provides installation instructions, details of corrections, and additional information.

By the way, this service pack does apply if your are using Vault 2008 with Civil 3D 2008, Civil 3D 2007 (with ADMS 2008 Support Patch), Civil 3D Land Desktop 2008 Companion(Subscription only), and Land Desktop 2008(Subscription only).

Monday, August 27, 2007

Data Management Server 2008 Service Pack 1 Pulled

Friday, we released Service Pack 1 for Vault 2008 and Autodesk Productstream 2008. Unfortunately, there was a problem for certain configurations. A newer service pack will be made available very quickly.

If you downloaded Service Pack 1 and have not yet installed it please wait for the newer service pack.

Check back for more information.

Wednesday, July 25, 2007

AutoCAD Civil 3D 2008 Service Pack 1

Just posted on the Autodesk website is Service Pack 1 for AutoCAD Civil 3D 2008. The Readme indicates over 125 fixes in 14 segments of the software were resolved by this service pack.

Friday, June 08, 2007

New and Updated Whitepapers

As announced by Dan Philbrick, Autodesk's Civil 3D Software Development Manager, in the blog he shares with Dave Simeone, "The Dave and Dan Civil 3D Show" Autodesk has just released one new whitepaper and updated a previous whitepaper.

The new whitepaper is titled:

Best Practices for Working with Large Data Sets

The updated whitepaper is:

Civil 3D 2008 Project Management Using Autodesk Vault

Lastly, Dan mentions technical solution 1071001 that involves enabling Window to over-ride the 2GB limit for applications and allow Civil 3D to use 3GB of physical memory to improve performance.

All of this information is very useful and much appreciated. Thanks Autodesk.

Tuesday, May 29, 2007

"Grading Best Practices" White Paper

Autodesk has released today a document that will describe the two primary methods for completing a grading design, and more importantly this document gives us a very thorough examination of the "Best Practices" involved with their use.

"Grading Best Practices", at 32 pages, is a very important read for anyone who wishes to use these tools as they were intended and with the guidance that helps produce accurate, and stable results.

I am sure that many will find this document to be a critical new tool.

Monday, May 21, 2007

Drape Image - Skill Builder

This skill builder has been available for a little while, but I had not had the opportunity to mention it yet. The 14-page "Skill Builder" titled "Draping an Image on a Surface Using AutoCAD Civil 3D 2008" shows us how to just that. This includes...

  1. Setting up a surface style
  2. exporting design data to Google Earth to locate appropriate image location
  3. Fine tuning Google Earth for suitable image
  4. Importing Google Earth image
  5. Draping image on to Civil 3D 2008 surface

Civil 3D 2007 & ADMS 2008, Service Pack

Because Civil 3D 2007 installs Autodesk Data Management Server (ADMS) 5 and Civil 3D 2008 installs ADMS 2008, and because these two items can not co-exist on the same machine, Autodesk has released for Civil 3D 2007 - ADMS 2008 Support Patch. This will allow Civil 3D 2007 with Service Pack 3 to connect to ADMS 2008.

This will solve this challenges for those that are configured this way..

Friday, May 18, 2007

LandXML White Paper

I am not certain when this white paper was released, but we can now download a 6 page white paper titled "LandXML Drawing Support".

This paper contains information about importing and exporting LandXML data in AutoCAD Civil 3D 2008.

Unfortunately, many people who would benefit from the use of LandXML are either completely or significantly unaware of how LandXML can contribute to increasing the efficiency of their design processes. This paper is a good first step to see what data can be shared to other users, applications, and agencies.

Wednesday, May 09, 2007

"Experience The Possibilities" Tour

On Wednesday May 16, 2007 we here at KETIV Technologies will be at Autodesk's North American tour when they stop in Anaheim, CA (about 5 miles from our offices). We will be available to provide lots of information about the 2008 family of products.

I hope to see you there.

Tuesday, April 17, 2007

Live From Orlando

I have been in Orlando since Sunday evening. Autodesk is hosting all reseller technical personnel in what is called a "Tech Camp". Today I got my first guided instruction for Autodesk Civil 3D 2008. Among the items covered in my sessions today, my favorite had to do with working with large amounts of data. I was pleasantly surprised by how fast certain things were happening even with LOTS of data. Plus they gave us tips to make things work faster. I will share these as soon as I can organize my many notes.

The best part of Tech Camp is getting together with friends and aquantances from around the country and sharing thoughts, stories, experiences, and what we've learned.

The sessions I am looking most forward to will occur tomorrow and Thursday. I'll be back then.

Friday, April 06, 2007

Today's (OOPS Last Weeks) Webcast (3-30-07)

I thought that I had posted this. Apparently not. Sorry. ACE

One thing became apparent to me during today's Civil 3D webcast titled "Introduction to AutoCAD Civil 3D 2008", and that was that Autodesk has been listening to the suggestions, complaints, and wishes from users. There were many usability enhancements shown during the one hour webcast by Dave Simeone (Civil 3D Senior Product Manager) and Dan Philbrick (Civil 3D Development Manager).

As I have been learning about Civil 3D 2008 I have been surprised by how many little improvements were added, where I found myself thinking "Yeah, this is better. Yes, I would prefer to do that this way instead of the old way".

I am looking forward to doing more with, and learning more about, 2008. Training demands do limit my learning time, but when I do get to learn I am very pleased with the results.

"Like what?" you may ask. Well, here are a few small things that caught my attention:
  1. Extract object from surface (i.e. Contour, Boundary)
  2. Modify objects via Properties (that is the AutoCAD Properties window)
  3. "Assign Elevations" during feature line creation (from Surface or Grading).
  4. Collapse and Expand baselines and regions in Corridor Properties dialog box.
  5. "Set All Frequencies" in Corridor Properties dialog box.
  6. Boundary creation for corridor surfaces now use a jig line (like parcels automatic mode).
  7. Create Profile View now uses a wizard.
  8. Section View Group Properties (change all sections views at once).
  9. New Workspace.
  10. Move blocks to surface elevation.
Clearly, there were the more marquee improvement such as...
  1. Automatic Plan Production
  2. Vault enhancements
  3. 2-10 faster corridor creation
  4. New "Lines and Curves" menu pulldown.
  5. DWF files will include object data
  6. Google Earth import/export

Now, back to training.

Wednesday, March 28, 2007

AutoCAD Civil 3D 2008 Launch Webcast

During this Friday's weekly Civil 3D webcast (March 30, 2007) Autodesk will officially launch/introduce AutoCAD Civil 3D 2008 (notice the name change).

The webcast is officially titled "Introduction to AutoCAD 2008". It takes place during the typical webcast time slot of 9:00 am to 10:00 am Pacific Time.

Last year the similar introduction webcast had what was likely the highest attendance of the entire year.

Registration is required. We will receive an email notification with dial-in and log-in information immediately after registering.

By the way if you are like me and missed last weeks webcast "A Sneak Peek at AutoCAD Civil 3D 2008" it is already posted for viewing.

Monday, March 26, 2007

What's New?

One of the resources that I enjoy reading in order to update my understanding of new versions is the New Features Workshop.

The New Features Workshop for Civil 3D 2008 contains 66 topics that range from 1 screen to 8 screens worth of information on that topic.

Click the links to see what is coming in 2008. I think you will find MANY good improvements.

Monday, March 19, 2007

Brought To You By... AutoCAD 2008

This post is in case some of this information has been missed by anyone.

All of the following should be available in Civil 3D 2008, because these items are available in AutoCAD 2008:

Annotation Scaling: Similar to automatic label scaling, but for text, mtext, dimensions, etc.
Layer Properties per Viewport: Override layer color, linetype, lineweight, or plot style per viewport.
Enhanced Tables: Co-mingle object information with Excel data easily, plus update notifications.
Text Formatting: Mtext columns support with many new options.
Multiple Leader Creation: Many ways to create multiple segment leaders from a single note.
Multiple Leader Alignment: Align and/or space multiple notes and leaders after creation.
Multiple Line Mtext Attributes: Mtext in Attributes.
DGN Support: Import, Export, and Underlay DGN 8 and XM files.

Monday, March 05, 2007

Nothing Up My Sleeve

Just like everyone else, I have been unbelievably busy. Although, I did get to try something that has me VERY excited about the future use of Civil 3D. A product will be out shortly called Advanced Road Design CORRIDOR-EZY. Some of you may have seen it at Autodesk University. This product is developed by CADApps Australia. After learning some about it here is my progress.

Step 1: Open original drawing with about 26 Alignments (see image below).
Step 2: Press one button. 45 second later drawing contains items software recognizes as "ROADS" and creates proposed profiles for them (see image below).

Step 3: Press a second button. 1 minute 5 seconds later drawing contains all curb return alignments and proposed profiles for them as well (see image below).

Step 4: Press a third button. 2 minutes and 5 seconds later a surface exists of the entire road system in a development (see image below).

4 minutes total!

Now, I do not wish to mis-lead anyone. I have not yet addressed Knuckles or Cul-De-Sacs, which this software can address along with Roundabouts. I would want to check all proposed profiles, change widths of certain collector streets, etc. But, for 4 minutes worth of work to do 33 intersections along 26 streets this is ama-za-zing stuff.

To qualify this, remember that I gave a Knuckle and Cul-De-Sacs class at Autodesk University this past November.

With some instruction we can create true Civil 3D corridors in a fraction of the time it would take with Civil 3D alone. Using Civil 3D by itself, in my opinion, a capable person could create an intersection for scratch in about roughly 1 hour (that means about 33 hours for the example above). At just about any price this product should pay for itself in no time at all.

And imagine what this will do for those involved with preliminary design and visualization, I can not think of a better tool to do that.

Oh, and I almost forgot the most impressive thing of all. Profiles of crossing streets are linked by the software. If I raise or lower a major road... ALL CROSSING ROAD PROFILES ARE ADJUSTED TO MATCH AUTOMATICALLY! Yes, all crossing road profiles. That includes the curb return profiles. We do not have to go back and adjust them manually. How awesome is that!

You may be asking, when can we expect to see this product? I understand that it should be available just about when Civil 3D 2008 is released, near April 16, 2007. If this all sound somewhat familiar that is because this is the next incarnation of Advanced Road Design INTERSECTION which has been out for awhile.

Thank you CADApps!

Monday, February 19, 2007

Windows Vista Update

In her Blog yesterday Heidi Hewitt provided an update about the support of Autodesk products on Window Vista. She states that AutoCAD 2008 and AutoCAD LT 2008 will be supported in both 32-bit and 64-bit versions of Vista.

But perhaps more importantly in the short term is that there will be in "the coming months" support for AutoCAD 2007 and AutoCAD LT 2007 on the Window Vista 32-bit version.

There has been no official word of future Vista support for Civil 3D yet.

Once again Heidi, thanks for the update.